kvmbuilder.blogg.se - Cnc 3018 machine setting

With a matching Black coloring, this laser module is meant only for the Laser head of the same color.

The red/black cable is for connecting the cooling fan. The yellow/black cable provides the connection to the laser diode. The laser head is connected to the laser control unit by two cables of about 30 cm length each. This is adjusted by turning the knurled knob mowing the shaft which contains the focusing lenses, in and out of the body. In order to ensure sufficient cooling, the laser is mounted in a heat sink, which is additionally equipped with a powerful yet quiet cooling fan. This is a 5.5W blue diode laser with a wavelength of 445nm. What's in the Boxĭescriptions of Primary Components Laser Head SainSmart does not accept any responsibility or liability for any use or misuse of the Laser.

Never use the laser except for the purpose intended.

DO NOT stare at the bright and intense light appearing during the engraving process.

Be sure to disconnect the power when cleaning, maintaining or servicing the laser equipment.

Ensure that the room or area you are operating the laser in is sufficiently labeled to prevent someone from unknowingly walking into an active work area.

Make sure the cutting area under the laser is metal or non-flammable.

Fumes and smoke generated during the engraving/cutting process must be extracted from the room as some can be poisonous make sure there is a ventilated system to the outdoors.

Never leave an operating laser unattended.

Keep a fire extinguisher nearby since use of the laser may lead to an unexpected fire.

When you focus the laser do so only on the lowest power setting.

Ensure that you are wearing proper laser safety goggles when working in the vicinity of the laser equipment.

Direct exposure to the laser beam can cause severe burns and eye damage.

You must be at least 13 years old to operate the laser engraver.

Consider the listed recommendations to minimize risk:

In addition, as always, competent SainSmart support is available to you at the e-mail address Safety GuidelineĪlways exercise safety and caution when working with laser marking systems. You can also get help and support in our Facebook group (SainSmart Genmitsu CNC Users Group, ). This blue 5.5W diode laser has a wavelength of 445nm, and is especially designed for use with our Genmitsu 3018-PRO, and 1810-PRO. Thank you for purchasing the SainSmart 5.5W laser module. Genmitsu 3018-Pro 5.5W Laser Module User Guide